Additive Manufacturing

Screen Shot 2024 03 25 At 3 19 32 Pm
Additive Manufacturing
3D Printing Material for High-Temperature Applications
They can withstand long-term exposure to temperatures of 110°C and even short-term exposure to 170°C without deforming.
Featured
Screen Shot 2023 05 02 At 10 17 39 Am
Manufacturing
Nexa3D Launches XiP Pro Industrial 3D Printer
With a 19.5-liter build volume, a single XiP Pro delivers the daily throughput of at least four competitive resin-based printers.
May 2, 2023
The new 20,000-square-foot facility will house more than 100 employees and includes an open concept floor plan, two showrooms, a print farm and a display of unique 3D prints.
Additive Manufacturing
Formlabs Opens Regional Headquarters in Milwaukee
The company will add more than 100 jobs and support the company's growing role in the U.S. industrial sector.
September 14, 2022
The new printer features a total build volume that is twice that of the Sapphire XC.
Additive Manufacturing
Velo3D Announces Sapphire XC 1MZ to Enable Large-Format Metal 3D Printing
It features a total build volume that is twice that of the Sapphire XC.
June 17, 2022
The M3 and M3 MAX
Additive Manufacturing
Carbon Announces New M3 Series 3D Printers
The developer of DLS 3D printing technology said it brings a number of new features to create a simpler 3D-printing experience.
February 1, 2022
3D-printed pedestrian bridge, Amsterdam, July 15, 2021.
Additive Manufacturing
3D-Printed Bridge Opens
Its distinctive flowing lines were created using wire and arc additive manufacturing.
July 16, 2021
Top Headlines
Staubli's new BosCon connectors.
Large-Format Connectors for North American Renewable Energy Markets
August 29, 2024
Unnamed
Velo3D Releases Flow 5.0 Version of Print Preparation Software
February 28, 2023
Unnamed
Build Plate with Embedded Sensors
February 2, 2023
Flow 3.0 can process models of parts that are larger to support the Sapphire XC's increased build volume. The impeller above is approximately 600mm in diameter.
Flow 3.0 Supports Print Preparation for Larger Parts
March 30, 2022
Latest
Security Breach Podcast
Sponsored
Security Breach Podcast
A new video series from Manufacturing.net - Security Breach, looks to offer the insight and tools needed to ready your company's defenses. Stay up-to-date on today's vital cybersecurity topics by subscribing here.
November 19, 2024
Screen Shot 2022 02 16 At 1 10 20 Pm
Additive Manufacturing
Carbon Unveils Flame-Retardant Resin
Offers an unmatched combination of flame retardance, functional toughness, high strength and long-term stability.
February 17, 2022
Screen Shot 2022 01 13 At 1 36 46 Pm
Additive Manufacturing
Optomec Receives $2M Order for Electronics 3D Printers
A leading electronics OEM is using the Aerosol Jet HD2 for advanced 3D semiconductor packaging.
January 14, 2022
Zygo Am 1
Additive Manufacturing
Additive Manufacturing: New Frontiers for Production and Validation
For production applications, "good enough" is no longer sufficient.
January 14, 2022
A novel polymer developed at Oak Ridge National Laboratory strengthens sand for additive manufacturing applications. A 6.5 centimeter 3D-printed sand bridge, shown here, held 300 times its own weight.
Additive Manufacturing
3D-Printed Sand Gains Super Strength in Polymer Discovery
The process is cheaper and faster than other 3D-printing methods.
November 12, 2021
University of Arizona researchers Andrew Wessman and Mohammed Shafae.
Additive Manufacturing
Ensuring Accuracy in 3D-Printed Jet Engine Parts
A sophisticated sensor and camera system will monitor the printing process and identify when and where defects occur.
November 3, 2021
The company’s Original Prusa 3D printers on display at EXPO 2020 Dubai are part of a fully-automated farm as a part of the exhibit, “The Future of Manufacturing by Prusa 3D.”
Additive Manufacturing
Prusa Unveils Fully Automated 3D Printing Farm
The company has 600 printers running nonstop.
November 2, 2021
I Stock 1077171172
Additive Manufacturing
3D Printing Method Improves Reef Restoration
Attaching coral microfragments to a printed skeleton starts the colonization process.
November 2, 2021
Twin Screw Extruder Mixing Element 1 (1)
Additive Manufacturing
Desktop Metal Qualifies 420 Stainless Steel for High-Volume Additive Manufacturing
Enables mass production of high-strength, end-use parts across medical, defense, aerospace and consumer applications.
October 25, 2021
Low Res Mit Metasense 01 Press 0 jpeg
Additive Manufacturing
Engineers Embed 3D-Printed Objects with Sensing Technology
Designers could use the method to print "interactive input devices."
September 16, 2021
This pollen-derived ink developed by NTU Singapore is able to hold its shape when deposited onto a surface, making it a viable alternative to current inks used for 3D printing in the biomedical field.
Additive Manufacturing
Scientists Turn Pollen into Biomedical 3D Printing Ink
The material could be used to make parts for tissue engineering, toxicity testing and drug delivery.
August 26, 2021
E8iiy Mk Wqa Qteb C
Additive Manufacturing
Desktop Metal to Acquire ExOne
The deal will join two additive manufacturing pioneers.
August 12, 2021
7000 Series Aluminum Is Commonly Required For Aviation Parts Such As Landing Gear Components
Additive Manufacturing
Optomec Adds Aluminum to Metal Additive Printing Recipes
Pre-qualified LENS-DED process parameters lower cost and speed time to production.
August 12, 2021
Studio System 2 In Situ
Additive Manufacturing
Titanium Alloy for Additive Manufacturing
Desktop Metal is the first company to commercialize titanium for bound metal production of high-strength, lightweight components.
August 10, 2021
Dr. Steve Stagon holds molds in UNF's 3D Printing Lab.
Additive Manufacturing
Engineering Professor Receives Patent for 3D Printing Mold Tool
The coating technology can save manufacturers time and money while reducing plastic waste.
July 30, 2021